ShawSeal TS2 Touchscreen Pneumatic Pouch Sealer | www.boelnordic.com

The ShawSeal TS2 touchscreen pneumatic pouch & sachets sealer

As with the original PPS sealers, seal temperature, pressure and dwell time settings can all be altered. However the sealer will not allow operation until the set-points have been reached, removing the risk of a pouch being sealed with the wrong settings. These settings can only be altered via a PIN protected screen, giving an added layer of security to the operation.

Cutting-edge touchscreen technology

Within the touchscreen interface are a number of tools which every company will find useful, including batch and master counters and a ‘calibration due’ and ‘calibration expired’ notification. Also present within the unit is the ability to ‘data-log’ every seal actuation (available at extra cost). Once activated, the seal temperature, pressure and dwell time are logged along with a time and machine serial number stamp. This data can then be exported out as a spreadsheet allowing the TS2 and its sealing process to be comprehensively and reliably validated.

Quality, efficiency and repeatability

Designed and manufactured in house by Riverside, the pouch/sachet sealers have a number of unique features that are standard to all units. Combined with that a wide choice of options are available offering the customer a product which suits their specific sealing requirements.

The units are compact and attractively finished with all external surfaces being stainless steel or powder coated making them ideal for cleanroom or laboratory sitting, whilst under the cover units are superbly engineered, being robustly constructed to cope with the demand of day in, day out production.

The heat seal process is achieved by a heated platen jaw pressured against a silicone gasket. The heated jaw is available in 4 different standard profiles or can be produced to customer specification. With the combinations available the ShawSeal can cope with the most delicate of medical peel pouches through to heavy gauge laminate bags.

ShawSeal units require a 240V electrical supply and a 5 bar (70 PSI) compressed air supply. The seal process is activated via a low voltage foot actuator (or via the touchscreen HMI) and cannot be interrupted or re-energised until the cycle is complete.

Three sizes of sealing widths are available

Starting at the ShawSeal PPS300-TS2 which can accommodate sealing widths up to 320 mm. For widths up to 420 / 520 mm ShawSeal PPS400-TS2 AND PPS500-TS2 are the solution. Units can be supplied for bench mounting or complete with stand.

All units come with a full instruction leaflet, which incorporates calibration certificate, cleaning & maintenance plan, parameter set up chart and service log. For units set up with the data logging functionality, all software and leads are included. Each TS2 has a one year guarantee.

ShawSeal TS2 units can be purchased outright or leased. Long term calibration and seal process validation plans are services Riverside offer.

The ShawSeal TS2 range is quite simply the best available in the market place. With their reliability the customer can rest assured that downtime is a thing of the past and production lines can keep running hour after hour. The seal quality and repeatability along with a process that can be fully validated will impress operatives and put any quality manager’s mind at ease.

Contact Boel Nordic for further information.