ShawSeal Pneumatic Pouch & Sachet Sealer |

The range of ShawSeal Pneumatic Pouch Sealers (PPS) has been developed specifically for use in the medical and food industries where quality, efficiency and repeatability are paramount.

The ShawSeal Pneumatic Pouch & Sachet Sealer

Designed and manufactured in house, the pouch / sachet sealers have a number of unique features that are standard to all units. Combined with that a wide choice of options are available offering the customer a product which suits their specific sealing requirements.

The units are compact and attractively finished with all external surfaces being stainless steel or powder coated, whilst under the cover units are superbly engineered, being robustly constructed to cope with the demand of day in, day out production.

The heat seal process is achieved by either heated platen jaw pressured against a silicone gasket or by impulse wire. In both types of unit the silicone gasket may be replaced by a secondary heat platen / wire to cope with more heavy duty applications.

Heated platen jaws are available in 4 different profiles or can be produced to customer specification. With the combinations available ShawSeal PPS can cope with the most delicate of medical peel pouches through to heavy gauge polythene bags.

Shawseal PPS require a 240V electrical supply and a 5 bar (70 PSI) compressed air supply. Seal temperature, pressure and dwell are all controlled during sealing. The comprehensive control system on all ShawSeal PPS enables the process to be reliably validated.

The seal process is activated via a low voltage foot actuator and cannot be interrupted or re-energised until the cycle is complete.

Three sizes of sealing widths are available

Three sizes of unit are available starting at the ShawSeal PPS300 which can accommodate sealing widths up to 320mm. For widths up to 420 / 520mm ShawSeal PPS400 AND PPS500 are the solution. Units can be supplied for bench mounting or complete with stand.

All units come with a full instruction leaflet, which incorporates calibration certificate, cleaning & maintenance plan, parameter set up chart and service log. Each PPS has a one year guarantee.

ShawSeal PPS can be purchased outright or leased. Long term calibration and seal process validation plans are services Riverside offer.

The range of ShawSeal PPS are quite simply the best available in the market place. With their reliability the customer can rest assured that downtime is a thing of the past and production lines can keep running hour after hour. The seal quality and repeatability will impress operatives and put any quality manager’s mind at ease.

Contact Boel Nordic for further information.